Metal Roofing Repairs Concord NH
Reliable Metal Roof Repairs Built for New Hampshire Weather
Metal roofing is one of the most durable choices available, but New England winters, heavy snow loads, and temperature swings can stress seams and flashings. Whether your roof is standing seam, exposed‑fastener, or stone‑coated steel, F.B.I. Contracting provides code‑compliant, manufacturer‑aligned repair to stop leaks and extend service life. We troubleshoot chronic issues, document findings with photos, and give you a clear written estimate before work starts. For urgent help, call (603) 286-4414.
Common Signs Your Metal Roof Needs Repair
- Water stains on ceilings or around skylights and chimneys
- Drips during wind‑driven rain or spring melt
- Separated sealant lines at penetrations and terminations
- Loose or lifted panels, missing fasteners, or bent hems
- Ice dams forming at eaves or behind snow guards
- Rust spots, coating loss, or impact dents from hail or branches
Ignoring small symptoms can lead to deck damage, wet insulation, and interior repairs. A quick diagnostic visit often prevents larger costs.
Address(Main Office):
18 The Town of Rockingham Rd #85
Concord, NH 03301
Satellite Office:
11A Cofran Ave
Tilton, NH 03276
Why Metal Roofs Leak in Concord
Most leaks trace back to details rather than the metal panels themselves. In our climate, we commonly see:
- Improper flashing at skylights, chimneys, and sidewalls: Curb or step flashings that weren’t formed or sealed to spec.
- Seam movement: Thermal expansion and contraction can stress clips and seams if the system wasn’t designed for it.
- Fastener fatigue: On exposed‑fastener systems, gaskets age and fasteners back out over time.
- Underlayment failures: Aged or punctured membranes allow incidental moisture to reach the deck.
- Snow and ice: Sliding snow dislodges flashings or damages gutters if guards or diverters are missing or mis‑placed.
Our Repair Process
- Inspection & documentation: We examine seams, fasteners, flashings, penetrations, and underlayment exposure. You receive photos and notes.
- Leak test & plan: Where appropriate, we perform controlled water testing to pinpoint sources and develop a targeted scope.
- Repair execution: Panel re‑seating, clip adjustments, fastener replacements, sealant renewal, and fabricated flashings that match your panel profile.
- Snow management: We add or relocate snow guards/diverters at eaves, valleys, and over doorways to control releases.
- Final QA & maintenance tips: Seam checks, fastener torque, sealant cure review, and site clean‑up with a final walkthrough.
You’ll receive a written summary and recommendations to prevent recurrence.
Average Repair Prices: Residential vs Commercial
Pricing depends on access, slope, panel/profile, tear‑off needs, and whether custom flashings are required.
| Scope | Residential (typical) | Commercial (typical) |
|---|---|---|
| Diagnostic Visit & Estimate | No‑charge estimate | No‑charge estimate |
| Sealant & Fastener Refresh | $350–$950 | $600–$1,500 |
| Flashing Fabrication & Replacement | $650–$1,800 | $1,200–$3,000 |
| Snow Guard Additions/Adjustments | $900–$2,500+ | $1,500–$4,000+ |
| Emergency Leak Response | $450–$1,200 | $750–$2,000 |
Need an exact quote? Call (603) 286-4414 to schedule a visit.
Brands & Profiles We Service
We repair standing seam systems (mechanically seamed and snap‑lock), exposed‑fastener panels, and stone‑coated steel from leading manufacturers:
- Englert
- Drexel Metals
- Metal Sales
- ATAS International
- Everlast Roofing
Preventing Future Leaks
- Annual inspections and targeted maintenance at penetrations and terminations
- Timely sealant renewal and fastener replacement on exposed‑fastener roofs
- Attic ventilation and insulation checks to minimize ice‑dam risk
- Properly designed snow retention to protect entries and lower roofs
- Gutter and valley cleaning to keep water moving where it should
Service Area: Concord NH & Nearby ZIPs
We repair metal roofs in Concord 03301 and surrounding towns within ~10 miles: Bow, Pembroke, Hopkinton, Boscawen, Loudon, and Penacook. Same‑week scheduling is often available. Call (603) 286-4414.
Authoritative Resources: Metal Roofing Alliance | Energy.gov: Roof Energy Efficiency
FAQ's
Can you repair just one section or valley?
Yes. We isolate the failure and repair the smallest feasible area while maintaining manufacturer‑aligned details.
Do you work on standing seam and exposed‑fastener systems?
Both. We adjust clips/seams on standing seam and replace gaskets/fasteners on exposed‑fastener systems.
How do you fix leaks around skylights?
We assess the curb, flashing kit, underlayment, and panel layout. Often we fabricate new flashings and reset the curb to spec.
Can hail dents be repaired?
Cosmetic dents may remain, but we correct functional issues like punctures, seam separation, and flashing damage.
Will repairs match my roof color?
We source color‑matched flashings and sealants where available. Over time, patina differences tend to blend.
How fast can you respond to an active leak?
We prioritize active leaks, especially during storms. Temporary mitigation may be used until full repairs are complete.
Will a repair void my warranty?
Repairs performed to manufacturer guidance generally preserve coverage. We document methods and materials.
Do you offer maintenance plans?
Yes. Seasonal inspections and minor tune‑ups reduce emergency calls and extend roof life.
What if my deck is damaged?
We replace compromised decking and underlayment as part of the repair scope when required.
Can you add snow guards during a repair?
Yes. We design and install snow retention in conjunction with leak remediation to prevent future issues.
Related F.B.I. Contracting Pages
- Metal Roofing (Overview)
- Skylights: Installation & Repair
- Best Metal Roofing Contractor Near Me (Concord NH)

